|
I just did my speakers about a month ago. You do have to remove the door panels completely. I have a 98 LT, so I'm guessing that my Blazer and yours are not much different as far as door power controls. Once you remove the screws from underneath the door armrest, pop off the power control panel on the door. Once you have the door panel off of the door, the control panel will fit cock-eyed through the opening in the door panel. You do not need to disconnect any of the power window or lock wires. After you get the old speaker out and go to put the new speaker in, you will need to be able to tell which wire is positive and which one is negative. The wire connections are not standard connections, so you will need to do a bit of wire splicing.
That's pretty much it.
|