Rewire your Signals (4th Gen)
Tools needed: Soldering iron, phillips & flat head screwdriver, Soldering wire, multi-tester
[list=1][*]Remove the Blinker and side lights from the car. [*]CUT the ground from the sidemarker and reroute it so you can splice it to the (+) of the turn signal. If you don't cut it, all the current from the (+) of the turn signal will go to the uncut ground of the sidemarker = short circuit = blown fuse...[*]Test: when lights are off: Blinkers should go on at same time when lights are on: Blinkers whould alternate when flashing.[*]Replace lights, and repeat on other side.[/list=1]
|