UPDATES:
Here are some pictures of the design so far. Sorry if the pictures dont work, both AF and my other image host are being screwy, so I have to use Tripod.
Heres the design for the body, both top and side view (also a picture of the materials used).
Materials List:
Compass
Dividers
Mechanical Pencil
Aluminum Ruler
Tamiya Masking Tape (A million and one uses for)
Multiple Erasers (I have gone through 1 1/2 erasers so far)
Depth Gauge (Good because it measures in 1/32's" and 1/64's")
30-60-90 Triangle
Circle Template
Large Steel Square (Not Shown)
Top View (AKA Royal Pain, but so is everything else about this project)
Begining of frame design. Starting with the top since thats the major view. First thing I did was cut a 26" sheet of Crayola Paper (126'x11"). After that I tacked it in place right over the car with some Tamiya Masking tape. This paper is semi transparent so it works perfectly to draw the frame right on top of the car.
EDIT-Many thanks to Andrew (BlownCivic1320) for getting my picture problem straightened out!