Have you ever pulled off any of the injector plugs? IF you have, as soon as you do, you'll get a code 16 and it will stay there til you reset the ecu. If any of the plugs come loose ull get a code 16. Same thing would happen to me when I was missing some of the injector clips, when I would go over a big bump/pot hole, the plugs would come loose.
just check to make sure all plugs are tight, make sure ur getting 6 ohms of resistance from each red/black wire, and check for continuity from ur ecu to ur injector resistor box, from ur box to ur injectors, and from ur ecu to ur injectors
Also, pull each injector plug off one at a time. When you pull each one off, they should make ur engine lug/bog. So, if you pull one, and nothing changes, that's the plug/wiring that's causing you problems.
__________________
Jumper harnesses, mpfi conversions, engine harness conversions, vtec subharnesses, etc.
The absolute lowest prices at the absolute highest quality. Trusted. Guaranteed.
Click the image above to visit our online store!
Hastings Bseries and Dseries piston ring kits (inc. ZC) - $49 shipped