|
Re: Help! Lights Dimming! Help With Capacitor!
If you possess the ability to cut a piece of wire and hammer a terminal onto each end, then you can upgrade the big 3 yourself.
Steps:
1 - remove negative battery terminal, just in case
2 - pick one of the 3 wires to start on
3 - lay out your new wire right next to the stock wire and mark the length
4 - cut the wire that long
5 - strip the ends
6 - hammer a ring terminal onto each end
7 - bolt the wire to the same places as the stock one, so they're running right next to each other
8 - go back to step 2
When you do the alt + to batt + just make sure you put an inline fuse holder in it, just like when you run the power cable for an amplifier.
__________________
'01 Black Sentra SE
Weapon-R intake, HS header, HKS catback, ES motor mounts, B&M short shifter, Tein coilovers
Alpine 9835, Adire Koda 6.1, Adire Brahma 15, Arc 2100cxl, Linear Power 2.2hv, Cadence ZRS-8
'05 Silver WRX STi
Injen SES Downpipe, HKS Carbon-Ti catback, Cobb Stage 2 Tune, TiC Super Shifter, TiC Klunk Killer, Tein springs, Nitto NT555R Drag Radials
|