|
Oh absolutely it will. Everything to the taillight is fed thru that little sensor.
I don't see why not. Find the wire (I don't have a schematic here) comming from the brake switch. You have to crawl under the dash and see the color of the wire. THen find that wire where it go into the lights out sensor in the trunk. Slice into that wire and jumper it over to the wire that comes out of the same connector and goes to the brake light.
It doesnt cost anything to open that sensor and eyeball the circuit board and if you havent taken out a diode or resistor and its a fried solder trace it easy to fix.
Good luck.
JJ
|