Does anyone know a good source for specs on the gauge clusters and wiring from different years of Civics... the reason I ask is because I was looking at my friends 2000 SI and the gauge sizes seem to be the same as the ones in my 92 civic... of course the cluster is totally different shape and the wiring is different, but if the gauges are the same size and the connections are similar from the harness, I think it should be possible to replace the tach, spedo, and fuel/temp dials into the other cluster housing and just re-route wires if necessary for the appropriate leads.
However since I don't have the Manuals for the other years yet... (I'll get them if it is even remotely possible) - I don't know. I searched the forums and didn't see anyone that had tried this. If anyone can point me in the right direction I'll be happy to write up a detailed tutorial and post it if/when I conquer this beast.
I'm not afraid of a soldering iron in the least, and if necessary am willing to do my own IC project board if the carrier signals need to be adjusted in voltage, etc... in order to have the 2000 SI gauges work on the 92 ECU signals for the cluster. Any help is greatly appreciated... if nothing exists - look back here for the completed tutorial... I'm gonna do this even if I have to custom fabricate everything myself.
