95 Camry breaks dragging
May be someone already had this kind of a problem. Just don’t want to “reinvent the wheel”…
I did rear breaks on my 95 Camry, drum looks fine so I did not have it turned. When I reassembled the breaks I checked if there is any dragging and there wasn’t any. Then in acouple of days I just checked all the wheels and noticed that RR was hot, jacked up that side and drum was not locked up but sure was dragging a lot. So I removed the drum readjusted the self adjusting wheel, put the drum back on and drove around the block, used parking break (I think that’s how that little self adjusting wheel gets rotated to move the shoes closer to the drum) jacked up the right side again and checked drum for dragging with the wheel off, everything was fine. Yesterday I noticed a little noise while breaking, checked that wheel – it’s dragging again!
Any ideas are sure appreciated.
Last edited by nmikmik; 04-01-2004 at 10:14 AM.
|