[steved]

I have a 2001 Explorer Sport Trac, I found mine on a white box mounted behind the passenger side airbag. It takes about ten minutes to get to. You will need a 1/4" rachet with an 8mm socket and a 9/32" socket.

1. Open the glove box and push in both sides of the glove box so it can open all the way.

2. There will be two bolts with the 8mm head on them you will need to remove. This will loosen the the airbag for removal.

3. Unplug the wires to the airbag.

4. Look in the hole in the dash where the airbag was and you will see a white box mounted to what looks like the air duct with two 9/32" hex head screws.

5. Tilt the white box so you can see the top of it and their is your code.

After typing all this I do remember reading on the Explorer Sports this white box is locacted in the back either over the right or left wheel well behind the interior panel.

Steve