|
vacuum questions
I'm about done with a 55' chevy pickup on a 86' suburban running gear. I used the brake boster and the 400 trans. I'm instaling a holley tbi and need to instal vacuum lines to the trans and brakes and a map senor. Can I put a tee in the intake and run one line to the brakes and run one line with a small tee to the map and the trans. the only thing I see is that when I use the brakes the map will see a vacuum being used and rich the fuel and the trans will see the same thing and down shift. Also I need to run a wire to a switched power sorce for the ecu, I put a painless wiring harness in. Any ideas will be helpful.
|