|
I make up small bushes that fit inside the hole so that it is one sold round piece. This way it gives you plenty of area to glue.
Glue the bush inside the rim.
Then glue the rim to the brake disc using superglue.
The only thing you have to be careful of is getting the offset and camber correct.Takes a bit of mucking around getting right.
For the Tamiya one where you have broken the pin.......on some rims you can drill a small hole though the rim and use a small round piece glued into place and cut to length. Then fill the rim at the front with a small bit of putty and try and shape it back to what it looked like before you begain.
|