[amac209]

you know whats funny? gm pays .6h if the switch is replaced under waranty but most shops charge around 2.0h cause those things are such a pain to replace. if you decide to replace it yourself you need to remove the column shroud, there are a couple bolts holding the switch in i believe they are torx t-15 if you get the short drill style you can remove the bolt under the steering wheel by turning the torx bit with a 1/4" wrench, the others are easy to get at. the lower harness is held together with either a 8mm of 10mm bolt i cant remember there are also 2 wires above the brake pedal somewhere. give yourself lots of time for this job and have a few band aids handy theres lots of sharp stuff down there. good luck!!