|
Re: Ball joint tool
the specialty tool is a big ass ball peen hammer. the key is, loosen the nut to the end of the balljoint, then look on the lower control arm, theres a flat knob that kinda pokes out right on the end. hit that spot as hard as you can with the ball peen, and it will come loose. then just take the nut off the rest of the way, and you are set. i wouldnt recommend actually hitting the nut or balljoint itself, because you can mess up the forums.....erm, i mean the threads....yeah
__________________
over 10 grand in parts, and about 300 hours of labor, and i only spent 3k. and then Katrina filled it with mud.
|