|
Re: dist rotor won't rotate
Sounds like the distributor o-ring is rock hard and has fused the dist. into the adaptor. Try rotating the dist housing and just keep pulling straight up. Lightly tap it with a small hammer if need be. There are no other fasteners holding it in.
It sounds like you've broken a timing belt for some reason either age, or faulty tensioner/waterpump pulleys ?? Pull the front cam sprocket cover off and watch the sprocket as you turn it over. There are 3 small 10mm bolts holding the cover on. If the sprocket doesn't move then the belt has failed for some reason.
|