|
Ya, unplug your coil wire, pull the plug on the #1 cyl. and if you don't have a buddy to bump your starter, reach over and jump the solenoid with a screw driver, and wait 'till the compression blows your thumb off of the plug hole. That'll get you close enough to TDC to set your distributor. Or stick a long screwdriver (or anything) in the hole and turn the motor over with a breaker bar on the crank pulley and feel for the piston stopping up top.
__________________
BUTTERS: Well, uh, gee wiz, I'm not w-watching television, Dad, I'm just laying here jackinit.
BUTTERS' DAD: Jacking it? Jacking what?
BUTTERS: Well, my hot, spicy, b0ner, of course, Dad.
|