[Self]

Originally Posted by 2000LS1Z28

Hey guys, I decided to keep the Z28 (It's almost paid off, and all the Supras in my area are going for over $20K, even with 100K miles on them). In any event, I just bought a torque arm and line lock for my car. I've had nothing but bad luck squirting off the line, even with drag radials. My main problem is having the space to heat the tires up. I'm somewhat fearful of running over the track stagers by applying the brake and the gas, so i bought line lock to control the uncontrollable
I also bought Edelbrock's torque arm for my car. Below I will list the mods on my car. I typically drive at Speedway (Not the best for traction), and my best there is a 2.3 sec. 60' (I know, I suck). How much time can I shave with the tires properly heated? Below is a list of the mods on my car (Hopefully i don't forget any of the mods):

2000 Z28 (Yes guys, it is an LS1). Z06 intake manifold, Z06 clutch/flywheel, MAFT, underhood ram air, whisper lid, magnaflow muffler, exhaust cutout (Can't be used in conjunction w/ muffler), MSD wires, iridium plugs, Edelbrock 100 dry shot, HPP3, Pro 5.0 shifter w/ short handle, panhard rod, and nitto drag radials (Plus the new toys).

Ok, seriously man, I don't know what the problem is, lol. You should be running low 12s and pulling 2.0 60s. Keep going to the track until you achieve that, haha. j/k man. But seriously, just get back out there asap and try again.