|
20B Swap for FD3S RX-7
You can knock off the items I have in BOLD which will reduce the price by about 12k. That will leave you with a total of around $25,000 w/out labor. And labor will cost you an arm and a leg.
Pettitracing.com - Does the swap/provides parts
SRmotorsports.com - Provides parts
MVA Motorsports - Does the swap/provides parts
Engine Core: 2400.00
Rebuilt engine (3mm apex seals, clearance, seals, porting, pinning, etc): 5000.00
Computer + Ignition: 2400.00
3Bar map sensor: 160.00
Plugs + Wires: 300.00
Subframe delima: (Pettit 2800.00) or (Other 2500.00)
Radiator & Fans: 739.00
Throttle Body adpater: 250.00
Water neck reducer: 170.00
Power steering cooler: 78.00
2nd oil cooler unit (if not an R model): 160.00
Intercooler: 1500.00 (custom) or 2200.00 (Pettit)
IC Piping: 300.00
Clamps / Hoses : 145.00
Injector fuel rail: 425.00
3x 1600cc injectors: 400.00
Fuel System (3xpump, lines, sump,etc): 875.00
SX FPR: 165.00
Maz PPF: 360.00
KAAZ 1.5w LSD: 775.00
Chromoly Axles: 775.00
Guru Transmission: 5600.00
Tripple Disk clutch (Disk, PP): 890.00
20b Flywheel & Counter weight (remember, all 20b's came with autos!): 625.00
Upgraded front brake kit: 2200.00 (Pettit)
Suspension Coilover kit: 1750.00
Battery Relocation: 145.00
Single Turbo Manifold: 1350.00
DBB Single turbo (700hp): 2300.00
60mm Wastegate: 850.00
Wastegate plumbing: 40.00
Custom Downpipe (4"): 275.00
Custom Midpipe with resonators (4"): 350.00
Custom Exhaust Muffler (4"): 450.00
Misc Clamps / Gaskets: 50.00
Gauges: FPR, BOOST, EGT, WATER TEMP, + PODS: 720.00
. . . . . . . . There are still many things I have not included. But this gives you the basic idea. I have calculated from the amounts above to: $37,472.00
Keep in mind that $37,472.00 does not include labor for installation (HUGE!), tuning, dyno time, fabrication, etc.
The price $37,472.00 also is based off non-pettit items, and purchasing a majority of these items individually like people who try to do it themselves would. - Red-Rx7
|