[1qwik4]

Ok, I just did this two days ago. Have someone help you, you have to do this.

Fill the resovoir to the full line. Have a container half filled with the fluid you are filling it with. Attach a vacuum line from the slave cylinder bleed valve and put the other end into the half filled container of fluid. Now have someone push the clutch down and then open the valve when the clutch is still held down. Have your helper lift the clutch peddle back up by hand with the valve still open. When the peddle is up, close the valve and repeat the process. Do this about 3-4 times and make sure the resovior doesn't go empty otherwise you will have to start all over again. Hope this helps