Well the codes that I got where the following:
P0717, P0753, P0758, P6718. To my understanding 717 was, open circuit at the speed sensor, the 753 & 758 where tranny solenoids A&B Open and there was a P6718 that I do not have idea what it is for. The funny thing is that on my Z-34 when the speed sensor failed there was no speed reading on the odometer. I just got the LS1 scanner for the PALM OS V3.5 and it is funny the car did not had to get to the shop. I resetted the SES and the car is working normally. The guy that did the job told me that maybe the ECU (PCM) fell on some kind of safe mode preventing the car to run normally until it got scanned. The only problem wife had with the car was that she fell on a big pothole. I do not know what else could put the PCM on safe mode.
Nevertheless I reset the SES and the car is running fine now, so I saved the trip to the shop… Any information about the PCM safe mode thing?
Ripn12s, I got 3.5deg from 0 to 60 and when reaching the 100mph the kr averaged 4.5degs. Tell me what you think?