[Joshtee]

I was wondering if anyone could help me with a problem I am having w/ a 1992 Taurus' windshield wipers. I have read the other topics regarding this subject and tried the suggested solutions with no success.

The windshield wiper motor will not work in any position on the controls. The windshield washer motor is working, so I assume that the circuit breaker is fine, since they use the same one. I also checked all the other fuses. The wiper motor is getting power from some of the contacts. The motor has 2 sets of wire connectors, one on the gear assembly and one on the motor itself. On the gear assembly there are 4 wires (black, Red, Green, and Black w/ a red stripe). The only one that has power is the green one. As for connector on the motor itself, there are 3 wires, I get power from all 3. I bought a new motor and hooked it up and still no results.

At this point I am assuming that it is the switch on the multi-function lever mounted on the steering column.

Any help would be greatfully apprectiated, Thank you