[94accord1g]

first off do you have abs?
if ya do did it start diong this right after you replace the front pads? did you do a normal bleed? did you do an abs gravity bleed? cause abs systems don't work like striaght hydrolic systems
if ya have abs and didn't do a gravity bleed the do this:
top off the master then get all 4 wheels off the ground, start from the furthest point from the master cylinder and open the bleeder valve with no foot pressure the valve will let the air out shut the valve when you run all fliud with no air or milk, then work your way over to the drivers rear and do that caliper,next to the pass front and then if ya haven't run out of fluid do the drivers front. just remember to check the master each time don't pump the pedal and take your time let me know what happens and good luck
andimout:evillaugh