|
Judi,
FYI, the computer is under the hood, on the passenger side front. To get to it, you will have to remove that black brace going from the strut tower to the front frame, then remove the clip holding that fuse box in place. Move the fuse box aside, and you will see the computer, it's in a black case with 4 big bundles of wire going into it. You will then need to use a 10mm wrench I believe to loosen the 2 or 3 nuts holding the computer in place. There's an access panel on that black case to look inside and access the main chip. If you need to inspect the whole circuit board, the whol case will need to be opened. THis might be more information than you ever wanted, if you're not handy with the tools. It's not a real hard job, but not the simplest if you're not experienced with underhood work. Hope this helps.
|