|
Re: 92 accord bleeding the clutch?
keep on pumpin.. pump in and then tighten.. pull the pedal out the loosen.. pump and tighten.. pull pedal.. repeat making sure the clutch fluid resivor is full.. then after doin that maybe ten times you should have pretty much need clutch fluid all thru the lines.. tighten the the bleeder.. then then pump in and out.. pull it out if you have to.. just keep pumping.. make sure the resivore is full.. and not sucking in air... hmm... if this doesnt work i'd say there is something wrong with the CMC (clutch matser .. blah) pull it off and check it out.. see if its pumping and sucking in the fluid..
__________________
97' talon Tsi fwd..
Rebuilding the engine.. should be running atleast 14.5 stock when i get that whip back together 
'94 accord Lx coupe swaped ta Vtec...
1/4: 15.1 
MODs: custom CAT.. VERY highflow.. Theres no Replacement for displacement.. and add me.. you can have times liek this too
90% driver 10% car
Nom'tawkin'bout
|