|
Keyless entry
This worked for my 99 Jimmy.
Get into the drivers seat and close door
Hold down the unlock button on the door panel
Turn the ignition switch to the ON position
Turn the ignition switch to the OFF position
Turn the ignition switch ON again
Turn ignition switch OFF
Release the power doorlock switch on the door panel
The doors will lock and unlock indicating that they are in the programming mode
Hold down the lock and unlock buttons on the remote until the locks cycle (lock and unlock)
Do the same for all the remotes you have. You have to do all the remotes at the same time.
When you are done turn ignition switch on then off. Get out of vehicle shut door and try each remote.
Hope this helps
|