ok i've seen the results from that artical on zzp and ive seen all the different air boxes and what not, and when i seen what the hell these guys were charging for some PVC and a boot i thought i'd make my own i went to a local performance shop picked up a reactive air filter for 35 bucks went to Home Depot bought 7 dollars of 4 inch Pvc and 2 $4.50 4 inch rubber boots then went home to build it.. i relocated my PCM just behind the coolent bottle overflow, vertically, then drilled out a 1/2 inch whole in 1 boot then sliped it onto the Throttlebody tightend it down measured out how much PVC i'd need about a foot and a half sliped the other boot onto the other end slid the filter inside tightend the to belt like things on them(sorry don't know what there called) placed the filter into the triangle like hole were that thin plastic piece with the hole was then attached the tube into the boot on the TB tightend them up put the senser into the 1/2 hole and i was set took about 45 mins cost 16 bucks plus drive to home depot results a much improved breathing Devise thats loud as fuck.
PS: i don't advise removing the screen in my car (98 GT) it set the SES light off and had no noticable affect