Quote:
|
Originally Posted by iauthor
I simply can't find anywhere that tells me how to program my remote.
I have a 1996 Chevy Tahoe. If anyone has a clue I'd really appreciate it.
Thanks!
|
Hi,
This is the procedure for the factory installed keyless remote
1. Short pin 4 and 8 on the DLC (Data Link Connector) After about 2 second the locks will respond with a cycle (close - open)
2. Press and hold the locjk and unlock button on the first transmitter you want to program, until the locks cycle (about 10 sec)
3. repeat step 2 for each remote (up to 4)
4. remove the short on pin 4 and 8
5. TEST OPERATION
The DLC is located under the steering wheel.
Bas