Quote:
|
Originally Posted by RAM9811
I have a 97 Yukon, keyless entry....the remote does not work at all, have changed batteries in both remotes, but still does not work....does anyone have a troubleshooting procedure...
|
I think you have to reprogram the transmitters. Thsi is how to do that:
1. Short pin 4 and 8 on the DLC (Data Link Connector) After about 2 second the locks will respond with a cycle (close - open)
2. Press and hold the locjk and unlock button on the first transmitter you want to program, until the locks cycle (about 10 sec)
3. repeat step 2 for each remote (up to 4)
4. remove the short on pin 4 and 8
5. TEST OPERATION
The DLC is located under the steering wheel.