[1992RS]

Well I don't know much about 1st, 2nd, and 4rth gen camaro's but I do know that on the 3rd gens there isn't a transmition mount persay. There's a cross member at the end of the trany tail shaft that the trany just sits on. The only thing that is actualy connected to the trany is the driveshaft and the torque arm. But no trany mounts. I'm not sure if the other generations are the same, but if they are then you need to check that cross member to see if all the bolts are on tight. Also check your torque arm. There is going to be some movement of your shifter though, so if it's not real excessive then I wouldn't worry about it.