Thread: remote start
View Single Post
Old 12-14-2003, 08:23 AM   #4
ponchonutty
AF Enthusiast
 
ponchonutty's Avatar
 
Join Date: Sep 2003
Location: New Washington
Posts: 3,432
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Re: remote start

Quote:
Originally Posted by mik10
I had to disconnect and reconnect the black control module. fixed Now the car starts fine, but when the alarm is activated and you try to start the car the lights flash and horn honk and it will not start. I connected the factory disarm wire from remote to the green/orange wire nothing happens. Two things either I have the wrong wire or I need to hook up a relay and I am lost their. the wiring diagram I have reads lt.green/orange, polarity postive
Yep, you just said what your problem is. You need to use a relay and change that (-) pulse to a (+) one. Get a relay and hook it as follows...
#85-to alarm disarm of remote start.
#86-to 12v constant source.
#30-to 12v constant source.
#87-to alarm disarm wire in vehicle.
#87a-is not used.

This will change the output from the starter to 12v instead of negative.
ponchonutty is offline   Reply With Quote