|
The vacuum switch is located on top of the transfer case, so you can't actually see it, but rather you have to reach around from underneath. On my model (1997) the 4wd transfer case closer to the driver side of the vehicle -- almost directly below the where the right leg would be if you were driving, if it helps to think of it in those terms.
It's a somewhat cumbersome fix because of the lack of wiggle room. I had so little room that I was unable to get enough leverage to work a socket wrench so I removed the driver seat, pealed away the carpet and drilled a hole just in front of the seat bolt and to the right by the stick shift to get at it.
|