|
hey, I did the same indicator light in my civic but I have a obd1 so I am not sure exactly what wire you need to use but it sounds like you have wired into the wrong wire. I would suggest looking under the hood and find the VTEC solenoid, and see what color wire is hooked up to it, there should only be one wire. That wire should then go over to the passenger side right where the strut tower is. On the engine side of the plug find the colored wire that goes into the plug that matches the one coming out of the solenoid, I think it is the one on the top front of the plug all the way to the passenger side but dont hold me to that. Then look on the ecu side of the plug and see what wire it is that comes out of the other side of the plug opposite from the one that you traced. Go inside and find the wire that matches the one on the ecu side of the plug under the hood. That is your VTEC signal wire and that is the one that you are supposed to wire into. If you have a tester "and know how to use it" assuming you do you can check to see if you have a signal when you turn the key on, there shouldnt be any voltage. If you need any more help with the problem just let me know, glad to help
|