don't panic. it's easy to replace the rear speakers. the covers pry up from the pot, and the speakers thenselves are bolted down with crosstip screws.
if ur planing on putting in slightly larger speakers, you may have to modify the hole by bending the fins around the inside of the hole. i had to do this with 240W Pioneers. i thought it was gonna be a tight fit. but after bending the fins a little, they fit right in with no damage to the car or speakers. then i simply used the original covers.
the only thing you have to make a choice on is the wiring. since the original speakers use a special connector, u may have to splice the wires. but other than that, it's easy.
DeeJay
majin-BU
N-II-Z-ist
|