The 6th Gens do have the mounting hole for the endlinks, like Dez said. The 5th Gens dont unless the already have rear swaybars. If this is the case you have to buy Integra LCA for the rear to get it to work. And I believe its the same way with the Neuspeed bar as well. The skunk2 swaybar will bolt right upto the stock holes with no modifications, except maybe reinforcing the Subframe to prevent tear out.
Thanks Dez.. I probably wont be upgrading the front swaybar unless Im noticing to much oversteer, I will play with it some after I get the Skunk2 swaybar installed and see how it is panning out. Chances are I wont need it but, just in case I do, I wanted to see how hard it would be going to a little bit bigger bar in the front. Now If my mounting hardware for the Skunk2 bar ever comes in and I can get it installed on the Civ. then Ill be off to a good start.
thanks again