Quote:
|
Originally Posted by mutsie
Is this a common problem?? Is there a test for resistance and voltage on these sensors???
|
Most likely the problem is going to be in the front....When the ABS light comes on, it stores a code that will help with diagnostics....especially what corner the problem is happening in....
The resistance reading of a WSS on your vehicle should be 1040-1160 ohms.
and when turning the hub assembly by hand, you should get about 100 mv A/C voltage.
From experiance, I find a lot of intermittant ABS concerns are caused by the jumper harness from the sensor to the main body harness.