[Jay eS Iye]

a friend of mine sent me the Dyno2000 program, which is a program that you enter the specs on your engine and you can modify things such as cam profiles, bore, stroke, etc and it will tell you what power changes you can expect. i'm trying it out just to see what its like, but i'm needing some specs. if you can help me out that would be great.

The specs i need are for the d16a6:

bore and stroke (inches)
intake and exhaust valve sizes (inches)
induction flow (cfm) @ something (inHg)
manifold type (single-plane, dual-plane, tunnel-ram, individual runner (I.R.), tuned point injection, sequential-fire injection)
type of lifter (hydrolic flat-tappet, solid flat-tappet, roller solid or hydrolic)
intake and exhaust lift@valve (inches)

there is also this section at the bottom that says:
IVO (BTDC), EVO (BBDC), IVC (ABDC), EVC (ATDC)
when Stock Street/Economy camshaft is selected, the values are:
IVO (BTDC): 12.0, EVO (BBDC): 66.0, IVC (ABDC): 62.0, EVC (ATDC): 10.0
any idea what that is and if its correct?