View Single Post
  #3  
Old 11-10-2003, 06:05 PM
litt_willie litt_willie is offline
AF Newbie
 
Join Date: Nov 2003
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
2.2 turbo

It is pretty easy to install a turbo into a 2.2. If you take a turbo off a 89 to 91 sunbird gt turbo, it is almost a complete bolt on. you will have to take off the exhaust pipe from the turbo to catalatic converter. You will also have to run vaccume lines to the wastegate. The air intake tube is the same as the 2.2. The only real problem is finding a place to put the oil and antifreeze lines. But you can just put a tee on the oil pressure switch for the oil feed line, and rig somthing up for the antifreeze line. I hope that this post was a little helpful.
Reply With Quote