Quote:
|
Originally Posted by hirofkd
If the contact surface is too small and the bond is not so strong, apply a piece of plastic sheet on the back of the bumper and body. You can use either styrene glue or super glue. To fill the gap, you can use superglue as a gap filler, or use solvent putty, such as Tamiya basic putty, Squadron or Testor.
To attach clear parts, don't use superglue or it'll fog up the part so badly, and you end up sanding and polishing to get rid of it. Use 2-part epoxy glue.
|
For the clear parts, is it alrite to use modeling cement?