Hi everyone.
I was thinking about installing fog lights from a crashed Primera to my '91 Primera. I was hoping mine was prewired from the factory. More than that, I even saw two spare wire harneses when I took the headlights off - didn't pay too much attention at he time. They had small connectors - just about for two wires. I *
believe* that there is a spare harness with a connector in the button area (wherethe rear foglight, emergency light and rear defrost are).
Well, yesterday I decided to take a closer look at the matter and started with the relay. In my car it is supposed to be in the box right next to the battery. So I pop the cover off, and what do I see? No relay! Well, I was kinda prepared for that, but to make matters worse - NO RELAY HOUSING or any wires *at all*. There is a housing for the A/C and something marked "Inhibit" (?!!), but nowhere to stick a fog light relay into!!!
Can anyone tell me what is going on? I am really discouraged now, and I wanted/needed those foglights because of the weather here. Will I need to wire the whole thing? How hard is it? Do I need to bother?
TIA
a very disapointed...
