Well thanks all for the great complements!
But it was the hell car from beyond to finish. I put 8 different paint jobs on the car before I came up with this one. Needless to say I was a bit frustrated at this point on my painting skills. Only reason why I didnt strip it again was for the fact the my good friend from Hawaii put the writing on the side.
So you want to know whats wrong with it? Ok heres a list- The gloss blob corection was worse than the blob. I had to sand it down to the plastic and do a repair which when finished resulted in over spray of silver on the red flames. Thinking its had several layers of glaze I tred to clean off the siler with thinner only to find it went thru the glaze also and left streaks thru it. Well I then went back over the area with some glaze and it looks ok, but not to my standards, and the glaze over sprayed in several spots that took several hours to compound out to smooth. After all that the gloss blob area still looked like crap.
Broken parts-both headrests, broke off the SAS parts to many times to count, tail light twice, headlights both.
The body just didnt fit right it had a small lean to the right which for not the lack of trying never could find the problem. The inside of the windows had glue resude from god knows what. The headlights and tail lights were a big pain in the ass to fit and neither set never did fit correctly.
I was so frustrated with the over all bad build by my part and the fact that I had such high hopes for the car that when the headlight broke off from inside after all my pictures and being careful I just snaped.
I guess there are some cars that just not ment to be and this was one of them...
Scott