Quote:
|
Originally Posted by TEXAS-HOTROD
Is it engine oil or tranny fluid? If the p.c.v. valve clogs up it will most likely push oil out of the rear main seal. Pull the pcv valve out of its grommet and w/the engine idling, you should feel the suction if you put your finger over the end of it. If it is a 2-piece rear seal, you should spin the seal in in the block and rear cap a few degrees. This keeps the mating surfaces of the seal and the split in the rear cap offset from each other, giving it less of a chance to cause a leak.
Hope this helps,
---TEX---
|
Thank you for your advice,I checked the leak to make sure what kind of oil is leaking. It is engine oil, the pcv valve is ok and my rear seal is one piece only.
Anyway I really appreciate your suggesstion,At least I learned some thing from you.
God Bless,