Yay my subs came in today
:o
finally. so P11GT, what specs do you need, you needed the sub displacement right? is that the dimensions of it? or something else, im reading it and it doesnt say "sub displacement" but ill post down everything it says.
Small Parameters XS-L1035
Impedence: 4 OHMS
d (mm): 210
d (inch): 8.3
Rdc (ohms): 3.6
Fs (Hz): 26.6
Qts: 0.43
Qes: 0.48
Qms: 3.96
Vas (Lit.): 49.6
Vas (Cu. Ft.): 1.75
Mms (g): 131.6
Lvs (mH): 1
Xmax (mm): 4.3
Xmax (inch): 0.17
BL (Tm): 12.8
Enclosure vol. (Net): 20 Lit. (0.7 cu ft)
Recommended Enclosure: Sealed
Specifications XS-L1035
Speaker: Woofer 25 cm (10 in), cone type
Maximum input power: 600 watts
Rated input power: 150 watts
Impedence: 4 ohms
Sensitivity: 88 dB/W/m
Frequency response: 25-2800 Hz
Mass: approx. 3.6 kg (7 lb. 15 oz.) per speaker
Dimensions (unit: mm (in.))
A (width from front view): (dont know how to type it, but its a "O" with a "/" through it, so ill just use O) O246 (9 3/4)
B (same as A but from side view): O263 (10 3/8)
C (inner diameter i believe): O234 (9 1/4)
D (height): 126 (5)
thats all they gave me. hope its what you need. now, back to the box