|
Re: New engine swap problems, someone help me
Yeah if it's THAT bad your wires are either hooked up incorrectly, or you have no compression in one or more cylinders. Rearrange the wires to cylinders 1-3-4-2 going clockwise, looking at it from the passenger side. I hope this helps.
Here is a very informative site for ZC dummies if anybody cares to broaden their horizons http://members.aol.com/_ht_a/nosajuf/nosajuf2.htm
Last edited by Ricochet; 09-30-2003 at 12:53 AM.
|