Quote:
|
Originally Posted by dward
HI NEVETS58,
THE PROCEDURE SHOULD WORK FOR ANY REMOTE PROGRAMING.
YOU NEED TO LOCATE THE REMOTE KEYLESS PROGRAM WIRE FOR YOUR VEHICLE. THE VEHICLE WIRING DIAGRAM WILL TELL YOU THE COLOR OF THE WIRE-MINE WAS GREEN. THE GROUND SHOULD BE BLACK. A MECHANIC SHOULD TELL YOU WHERE THE PROGRAM CONNECTOR IS LOCATED. IT IS LOCATED IN DIFFERENT PLACES. I KNOW WHERE MINE IS LOCATED. IF YOU DON'T HAVE TRACTION CONTROL, THEN YOU'LL HAVE TO FIND THE PROGRAM PLUG. SOME ARE LOCATED BEHIND THE GLOVE BOX AND OTHERS ARE LOCATED IN THE TRUNK. WHEN YOU FIND THE PLUG THERE WON'T BE ANYTHING CONNECTED TO IT BECAUSE THE DEALERS USE THE PLUG TO REPROGRAM A REMOTE FOR THAT VEHICLE.
THE DEALERS USE A LITTLE BLACK BOX. YOU DON'T NEED IT. WHEN YOU SHORT THE PROGRAM WIRE TO GROUND, YOU CAN REPROGRAM THE REMOTE(S)--ALL REMOTES HAVE TO BE REPROGRAMED WITH THE PROGRAM WIRE SHORTED TO GROUND. I WAS TOLD THAT THE OWNER'S MANUAL WILL TELL YOU WHERE THE PROGRAM WIRE CONNECTOR IS LOCATED. DON'T COUNT ON THE DEALER TO HELP YOU- THEY CHARGE $19.95 TO RESET YOUR REMOTE.
GOOD LUCK
[email protected]
PS I HAVE THE PICTURES AND INSTRUCTIONS FOR MY CAR. |
HI STEVE,
I USED ANDREY VAKALICH. HE HAS SOME REMOTE PROGRAMING INSTRUCTIONS. HE CHARGES $6.95 IF HE HAS YOURS. HIS E-MAIL IS:
[email protected]
GOOD LUCK,
DOUG