08-27-2003, 03:01 PM
|
 |
AF Premium User
|
|
Join Date: Dec 2001
Posts: 1,906
Thanks: 0
Thanked 0 Times in 0 Posts
|
|
|
Re: Ok got some ZC engine questions!
Quote:
|
Originally Posted by Problem_Si
yes, i believe the bottom rad hose is from an 88-89 integra.
You dont need to get an ecu if your car is an Si, the pm6 Si ecu will do just fine with the zc. Your ecu options are as follows.
Pm6 - 88-91 Si (good)
Pg7 - 88-89 Integra (better)
Pm7 - Jdm Zc ecu (best)
Ive had all three, and the pg7 integra is a cheap and effective ugrade, but not absolutely necessary. Like I said, If you have an Si, your needed parts list should be very short.
|
Dude..how does the ZC run with Si ECU? I am still confused how the SOHC ECU makes a DOHC motor run OK...Do you wire the cam sensor on the ZC to the correct pins in the Si ECU so it can find it since it isn't inside the dizzy???
__________________
-Shawn
'91 Civic DX sedan
DOHC ZC, I,H,E, urethane bushings and mount inserts, rock chipped hood, some rust, stock steelies, nice comfy Integra seats, and the A/C works! What else could you want from an 18 year old car with 241,000 miles? Working on getting the Si tranny in now 
|