|
yeah the si harness is already wired for mpfi, but your gona spend more time soldering all hte wires back together when all u had to do was move a few wires. i just cut it up about 1 and 1/2 and put a female connector on the conector side, then put a male on the wire side, then with the wire i ran to it, i just put another male connector on it. and then the other wire i first cut with the male connector, i put another female connector on the connector side so the wire was just plug and play. i did that for all of them so all it did was take me about half hour to do it. and i just got a pin from B2 i think it was that had a free pin so i just stuck it in B10 or B12 which ever one didnt have a wire on it. alot easier than soldering every wire
|