HELLO MY E-MAIL IS
[email protected].
STEP#1 REMOVE THE UPPER CENTER BEZEL FROM INSTRUMENT PANEL AND LOCATE THE TRACTION CONTROL BLACK CONNECTOR**DISCONNECT CONNECTOR-TURN IGNITION SWITCH TO (ON) POSITION.
STEP#2 GROUND CONNECTOR TERMINAL #4-THE BACK LEFT TERMINAL-THE BACK RIGHT TERMINAL IS GROUND-YOU CAN USE A PAPER CLIP IT WORKS JUST FINE. THE DOOR LOCKS WILL CYCLE-PRESS ANY BUTTON ON THE REMOTE CONTROL-THE LOCKS WILL CYCLE AGAIN CONFIRMING PROGRAM.
STEP#3 IF YOU HAVE MORE THAN ONE REMOTE CONTROL OR YOUR ORIGINAL REMOTE-IT HAS TO BE SET NOW AS WELL-THE GROUNDING OF THE REMOTE PROGRAM WIRE ERASES THE PREVIOUS PROGRAM.
PRESS ANY BUTTON ON THE SECOND REMOTE AND WAIT FOR THE LOCKS TO CYCLE. DISCONNECT THE PAPER CLIP OR JUMPER FROM THE GROUND. RECONNECT THE TRACTION CONTROL CONNECTOR AND REINSTALL THE UPPER CENTER BEZEL.
ENJOY
DOUG
PS I HAVE PICTURES IF NEEDED.