[P11GT]

i cant tell you what colour the wire is, anyway, it may be different to yours. all you need to do is to test it with a 12 volt tester, while cranking the car over. the tester will only light up for as long as you have the ignition key fully turned during cranking. Whatever you do, DONT CUT THE LIVE ON THE ACTUAL STARTER MOTOR!! a normal 12 volt relay cant handle all the current. All the wiring you need is under the steering wheel cowling. there will be a multi pin plug which plugs into the ignition barrel. note: on mine, when i fitted the remote start alarm system, there were 2 secondary postion wires and also 2 crank wires, one for constant live feed and the other for ignition position 1. making a total of 6 wires coming from the ignition barrel.