|
Rotary mini Drag-car
yup, i'm going to stick a 2.3 N/A rotary into a classic mini!
The problem i have is this - the original rear diff is far too large and heavy, does anyone know of a small light diff which is capable of holding out at 150 lb-ft.
I originally wanted a proper drag-diff setup, but they cost around £1K.
i'm using an engine and tranny I've already got, HEAVILY modifying a mini - but I'm screwed on the diff!!
I'm aiming at around £100 at most
anyone else out there making a drag car?
__________________
Never chase a lie. Let it alone, and it will run itself to death.
|