|
There is no need to wash the car after the clay bar.
Apply & Remove with the random orbit buffer for better results -- followed by a final wipe down with clean micorfiber towels
The cleaner does basically the same thing as the clay bar. I would go with the clay over the 1st step cleaner since you are polishing after. Polishing is also a "paint cleaner" by removing a fine layer of paint. Scratch X for the scratches.
Apply product with foam pads
remove polish/wax with wool pad(fluffy pad)Terry cloth also works for removal. Use different pads for each chemical.
Always work out of direct sunlight on a cool car.
1. Wash/dry
2. Clay bar
3. Polish
4. Meguiars New car or show car glaze(fills in micro scratches left by polishing & adds depth to the color)
5. Wax
Remove polish/glaze before it dries, let wax dry before removing. 2 thin coats is better than 1 heavy coat.
|