View Single Post
  #2  
Old 07-01-2003, 02:26 PM
CamaroSSBoy346's Avatar
CamaroSSBoy346 CamaroSSBoy346 is offline
AF Enthusiast
 
Join Date: May 2003
Posts: 3,661
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via AIM to CamaroSSBoy346
Some tools






-Testors paint pens, Gold, Silver G. Black
-Elmers Glue All
-Testors hobby knife
-Wire cutters
-Testors Tube Glue
-Testors Liquid Glue
-3 Testors Brushes
-Sharpie Marker
-Toothpicks
-2 sharpie markers (large and fine)
-Leatherman pocket Knife
-Testors Enamel paint
-Testors Acrylic paint
-Tamyia Acrylic Paint
-Phillips head Screw Driver
-Intercgangeable screw driver (changes from flat head to phillips head)
-Rustolium rattle can paint
-Tamya gun metal rattle can
-Krylon Metallic's rattle can
-Krylon primer rattle can
-Dupli-Color spray paint
-400 grit sand paper
-Masking tape
-Tape Meauser
-Can of water and paint thinner (for acrylic and enamel paints)
__________________
2002 F150 SuperCab FX4 6" Fabtech, 3" BL, Detroit locker, Edge tuned, Yukon 4.56s, 37" Nittos, Harley lights, Depo fogs, 8K HIDs, Powerstop brakes
1992 Lincoln Mark VII LSC 302 H.O, A9L ECU swap, 65mm TB, 73mm Granetelli MAF, FRPP 30lb injectors, Walbro 255, MSD ignition, Powerdyne BD11 supercharger, Efans, T-5 swap w/ FRPP flywheel, Ram HDX clutch and adjustable Steeda clutch quadrant, 4.10 gears, Nitto NT555R radials
2000 OBS Tahoe Z71 6k HIDs, 33" Goodyears. 280k mile daily beater
Reply With Quote